{"title":"Waterproofing \u0026 Moisture Control","description":"\u003cp\u003eBrowse \u003cstrong\u003ewaterproofing and moisture control products\u003c\/strong\u003e for protecting floor systems against water ingress and moisture damage. From liquid-applied membranes to moisture vapour suppressants, these products create reliable moisture barriers for wet rooms, basements, and ground-floor applications.\u003c\/p\u003e","products":[{"product_id":"ardex-p4-primer-ready-mixed-rapid-drying-multi-purpose-primer","title":"Ardex P4 Primer Ready Mixed Rapid Drying Multi-Purpose Primer","description":"\u003cp\u003eARDEX P 4 is a ready-mixed, rapid-drying multi-purpose primer for a wide range of substrates prior to ARDEX levelling compounds and tile adhesives.\u003c\/p\u003e\n\u003ch3\u003eKey Benefits\u003c\/h3\u003e\n\u003cdiv class=\"sw-benefits-grid\"\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eReady-mixed — no measuring or dilution\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eRapid drying for fast-track preparation\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eMulti-purpose for absorbent and non-absorbent surfaces\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eSuitable for concrete, screed and tiles\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eApply by brush or roller\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eEffective key on a wide range of substrates\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eDilutable for highly porous surfaces\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eReliable adhesion promotion\u003c\/span\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch3\u003eApplication\u003c\/h3\u003e\n\u003cp\u003eApply by brush or roller to the clean, prepared substrate. Allow to dry before applying levelling compounds.\u003c\/p\u003e\n\u003ch3\u003eCoverage\u003c\/h3\u003e\n\u003cp\u003eCoverage depends on substrate porosity — an 8kg tub of undiluted ARDEX P 4 should cover at least 40m² on most typical substrates.\u003c\/p\u003e","brand":"ARDEX","offers":[{"title":"8kg","offer_id":51124505477459,"sku":"ARDEX-P4-8KG","price":85.14,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/6720\/9043\/files\/7abbap2FAdbGpMYPzMzYyQ8_0_gps_generated.jpg?v=1792780082"},{"product_id":"ardex-rapidlay-membrane-tape","title":"Ardex Rapidlay Membrane Tape, 50m","description":"\u003cp\u003eARDEX Rapidlay Membrane Tape is a self-adhesive sealing tape designed for use with the ARDEX Rapidlay Membrane system. It provides watertight seals at joints, corners and transitions, ensuring complete waterproofing integrity in wet area installations.\u003c\/p\u003e\n\u003ch3\u003eKey Benefits\u003c\/h3\u003e\n\u003cdiv class=\"sw-benefits-grid\"\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eSelf-adhesive for fast, reliable sealing\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eWatertight joints at membrane overlaps\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eIdeal for corners and transitions\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eEnsures complete waterproofing system integrity\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eQuick and easy to apply\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eCompatible with ARDEX Rapidlay Membrane\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eSuitable for wet rooms and shower areas\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eFlexible and durable seal\u003c\/span\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch3\u003eApplication\u003c\/h3\u003e\n\u003cp\u003eApply the tape to all joints, corners and transitions of the Rapidlay Membrane to create a fully sealed waterproofing system. Press firmly to ensure full adhesion.\u003c\/p\u003e\n\u003ch3\u003eCoverage\u003c\/h3\u003e\n\u003cp\u003eAvailable in rolls. Length of tape required depends on the number of joints and transitions in the installation.\u003c\/p\u003e","brand":"ARDEX","offers":[{"title":"Default Title","offer_id":51124506788179,"sku":"ARDEX-ARDEX-STD","price":24.07,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/6720\/9043\/files\/Screenshot2026-01-16at10.57.26.png?v=1768557460"},{"product_id":"ardex-r6e-fast-curing-oil-tolerant-epoxy-primer","title":"Ardex R6E Fast-Curing Oil Tolerant Epoxy Primer","description":"\u003cp\u003eARDEX R 6E Oil Tolerant is a fast-curing epoxy primer for oil-contaminated concrete. Penetrates and seals oil-affected surfaces where standard primers would fail.\u003c\/p\u003e\n\u003ch3\u003eKey Benefits\u003c\/h3\u003e\n\u003cdiv class=\"sw-benefits-grid\"\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eDesigned for oil-contaminated substrates\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003ePenetrates and seals oil-affected concrete\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eFast curing for rapid turnaround\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eReliable bonding on difficult substrates\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eIdeal for garages, workshops and factories\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eTwo-component epoxy system\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eApply by roller or brush\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eEnables levelling on contaminated floors\u003c\/span\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch3\u003eApplication\u003c\/h3\u003e\n\u003cp\u003eMix Component A and B. Apply by roller or brush to the oil-affected substrate at the recommended coverage rate.\u003c\/p\u003e\n\u003ch3\u003eCoverage\u003c\/h3\u003e\n\u003cp\u003eCoverage approx. 200–300 g\/m² per coat. Refer to technical datasheet.\u003c\/p\u003e","brand":"ARDEX","offers":[{"title":"6kg","offer_id":51124506919251,"sku":"ARDEX-ARDEX-STD","price":94.2,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/6720\/9043\/files\/bqbbavjkB-q0pMYPvIr2iA4_0_gps_generated.jpg?v=1792779956"},{"product_id":"ardex-dpm1cr-rapid-drying-one-coat-surface-damp-proof-membrane","title":"Ardex DPM1CR Rapid Drying One Coat Surface Damp Proof Membrane","description":"\u003cp\u003eARDEX DPM 1CR is a rapid-curing, one-coat damp proof membrane for concrete substrates. It cures faster than standard DPM 1C, allowing levelling compounds to be applied sooner — ideal for time-critical projects.\u003c\/p\u003e\n\u003ch3\u003eKey Benefits\u003c\/h3\u003e\n\u003cdiv class=\"sw-benefits-grid\"\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eRapid curing for faster project turnaround\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eSingle-coat application\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eTolerates high moisture levels\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eOvercoatable in reduced time\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eCompatible with ARDEX levelling compounds\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eSuitable for new and existing concrete\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eRoller or squeegee application\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eSolvent-free formulation\u003c\/span\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch3\u003eApplication\u003c\/h3\u003e\n\u003cp\u003eApply by roller or squeegee in a single coat to the prepared concrete substrate. Ensure minimum coverage rate is achieved.\u003c\/p\u003e\n\u003ch3\u003eCoverage\u003c\/h3\u003e\n\u003cp\u003eRefer to ARDEX DPM 1CR technical datasheet for coverage rates per m².\u003c\/p\u003e","brand":"ARDEX","offers":[{"title":"Single Bag (3kg)","offer_id":51124507902291,"sku":"ARDEX-ARDEX-STD","price":112.74,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/6720\/9043\/files\/8KXbavqfFICepMYPgIvqmAU_1_gps_generated.jpg?v=1792779829"},{"product_id":"ardex-dpm1c-one-coat-surface-damp-proof-membrane","title":"Ardex DPM1C One Coat Surface Damp Proof Membrane","description":"\u003cp\u003eARDEX DPM 1 C is a one-coat, solvent-free, two-component epoxy damp proof membrane and residual moisture suppressant for sound concrete slabs and cement\/sand screeds with readings up to 98% RH. It can be used where a structural DPM is missing or ineffective, so levelling and floorcovering work can go ahead without waiting for the slab to dry.\u003c\/p\u003e\n\u003ch3\u003eKey Benefits\u003c\/h3\u003e\n\u003cdiv class=\"sw-benefits-grid\"\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eSingle-coat application — saves time\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eTolerates moisture up to 98% RH\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eEliminates long concrete drying times\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eWalkable and overcoatable after approx. 6 hours at 20°C\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eCompatible with ARDEX levelling compounds when primed as per the datasheet\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eSuitable for concrete and cement\/sand screeds\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eNotched-trowel applied, then back-rolled\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eSolvent-free two-part epoxy\u003c\/span\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch3\u003eApplication\u003c\/h3\u003e\n\u003cp\u003eMix the pre-gauged hardener (Component B) fully into the resin (Component A) with a slow-speed drill and paddle; working time is approx. 20 minutes at 20°C. Apply one even coat with a V-notched trowel, then flatten the ridges with a short-pile roller while still wet. Apply above 10°C. Calcium sulphate screeds: only up to 90% RH and only if ARDEX's conditions are met (screed manufacturer's approval, effective structural DPM, no underfloor heating) — check the datasheet.\u003c\/p\u003e\n\u003ch3\u003eCoverage\u003c\/h3\u003e\n\u003cp\u003ePer 10 kg unit: approx. 25 m² at 250 microns (up to 85% RH), 21 m² at 300 microns (up to 92% RH) or 18 m² at 350 microns (up to 98% RH, or where no DPM is present).\u003c\/p\u003e","brand":"ARDEX","offers":[{"title":"Single Bag (10kg)","offer_id":51124510097747,"sku":"ARDEX-ARDEX-STD","price":262.82,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/6720\/9043\/files\/zKTbav-ND5aO9OUPvOXEgQk_1_gps_generated.jpg?v=1792779537"},{"product_id":"ardex-r5e-rapid-curing-moisture-tolerant-epoxy-primer-6kg","title":"Ardex R5E Rapid-Curing Moisture Tolerant Epoxy Primer, 6kg","description":"\u003cp\u003eARDEX R 5E is a rapid-curing, moisture-tolerant epoxy primer for sound concrete, cementitious surfaces and calcium sulphate screeds, suitable for damp cementitious floors (where substrate RH exceeds 75%, use ARDEX DPM 1 C first). Faster cure times than standard epoxy primers.\u003c\/p\u003e\n\u003ch3\u003eKey Benefits\u003c\/h3\u003e\n\u003cdiv class=\"sw-benefits-grid\"\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eRapid curing reduces site waiting time\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eMoisture tolerant on damp concrete\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eNot a DPM — use ARDEX DPM 1 C above 75% RH\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eSolvent-free two-component system\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eCompatible with ARDEX levelling compounds\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eApply by roller or brush\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eReliable adhesion promotion\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eReduces project programme time\u003c\/span\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch3\u003eApplication\u003c\/h3\u003e\n\u003cp\u003eMix Component A and B. Apply by roller or brush to the prepared substrate.\u003c\/p\u003e\n\u003ch3\u003eCoverage\u003c\/h3\u003e\n\u003cp\u003e6 kg kit. Coverage approx. 200–300 g\/m² per coat.\u003c\/p\u003e","brand":"ARDEX","offers":[{"title":"Single Bag (6kg)","offer_id":51124529561939,"sku":"ARDEX-ARDEX-6KG","price":148.74,"currency_code":"GBP","in_stock":true},{"title":"Half Pallet (40 x 6kg)","offer_id":53447340261715,"sku":"ARDEX-ARDEX-6KG-HP","price":6008.26,"currency_code":"GBP","in_stock":true},{"title":"Full Pallet (80 x 6kg)","offer_id":53447340327251,"sku":"ARDEX-ARDEX-6KG-FP","price":12016.51,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/6720\/9043\/files\/LqHbaof8HoCepMYPgIvqmAU_1_gps_generated.jpg?v=1792778615"},{"product_id":"ardex-mvs-95-residual-moisture-vapour-suppressant-12kg","title":"Ardex MVS 95 Residual Moisture Vapour Suppressant, 12kg","description":"\u003cp\u003eARDEX MVS 95 is a one-component, water-based residual moisture vapour suppressant for concrete slabs and cement\/sand screeds with residual construction moisture up to 95% RH. Allows floor preparation to proceed without waiting for the slab to dry fully. Not suitable for direct-to-ground slabs without a functioning structural damp proof membrane.\u003c\/p\u003e\n\u003ch3\u003eKey Benefits\u003c\/h3\u003e\n\u003cdiv class=\"sw-benefits-grid\"\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eTolerates residual moisture up to 95% RH\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eEliminates long concrete drying times\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eTwo-coat short-pile roller application\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eOverlay with ARDEX levelling compounds from 2 hours, no priming\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eCompatible with ARDEX levelling compounds\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eSaves significant time on programmes\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eFor slabs and screeds with a functioning structural DPM\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eEffective moisture barrier\u003c\/span\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch3\u003eApplication\u003c\/h3\u003e\n\u003cp\u003eStir well and use as supplied — do not add water. Apply two coats with a short-pile roller, the second at right angles to the first once the first is touch dry. Overlay with 3mm to 10mm of ARDEX levelling or smoothing compound between 2 and 24 hours after application. Do not traffic between coats or before levelling.\u003c\/p\u003e\n\u003ch3\u003eCoverage\u003c\/h3\u003e\n\u003cp\u003e12 kg unit. Approx. 36m² for a two-coat application up to 90% RH, or 27m² up to 95% RH. Do not exceed the stated coverage.\u003c\/p\u003e","brand":"ARDEX","offers":[{"title":"Single Bag (12kg)","offer_id":51124531102035,"sku":"ARDEX-95-12KG","price":187.14,"currency_code":"GBP","in_stock":true},{"title":"Half Pallet (30 x 12kg)","offer_id":53447340753235,"sku":"ARDEX-95-12KG-HP","price":5710.99,"currency_code":"GBP","in_stock":true},{"title":"Full Pallet (60 x 12kg)","offer_id":53447340818771,"sku":"ARDEX-95-12KG-FP","price":11421.97,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/6720\/9043\/files\/nKDbavfAIuD_pMYPru2b0QM_1_gps_generated.jpg?v=1792778468"},{"product_id":"ardex-rapidlay-membrane","title":"Ardex Rapidlay Membrane, 25m x 1.45m Roll","description":"\u003cp\u003eARDEX Rapidlay Membrane is a self-adhesive uncoupling and waterproofing membrane for use beneath ceramic and natural stone tiles. It prevents crack transfer from the substrate to the tile surface, while also providing waterproofing protection in wet areas such as showers and bathrooms.\u003c\/p\u003e\n\u003ch3\u003eKey Benefits\u003c\/h3\u003e\n\u003cdiv class=\"sw-benefits-grid\"\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003ePrevents substrate cracks transferring to tile surface\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eWaterproofing protection for wet areas\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eSelf-adhesive for quick, easy installation\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eTile directly onto membrane once applied\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eSuitable for showers, bathrooms and wet rooms\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eCompatible with ceramic and natural stone tiles\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eUncoupling and crack-bridging properties\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eReduces risk of tile debonding\u003c\/span\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch3\u003eApplication\u003c\/h3\u003e\n\u003cp\u003eApply the self-adhesive membrane directly to clean, dry substrates including concrete, screed and plywood. Once in place, tiles can be fixed directly onto the membrane using a suitable ARDEX adhesive.\u003c\/p\u003e\n\u003ch3\u003eCoverage\u003c\/h3\u003e\n\u003cp\u003eAvailable in rolls. Coverage depends on area to be waterproofed — minimal waste due to self-adhesive application.\u003c\/p\u003e","brand":"ARDEX","offers":[{"title":"Default Title","offer_id":51124531167571,"sku":"ARDEX-ARDEX-STD","price":685.17,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/6720\/9043\/files\/JKDbaoW9DcmU9OUP9ayqgAo_1_gps_generated.jpg?v=1792778343"},{"product_id":"ardex-s7-plus-waterproof-coating-for-swimming-pools-15kg","title":"Ardex S7 Plus Flexible Waterproofing (White), 15kg","description":"\u003cp\u003eARDEX S 7 Plus is a flexible, two-component waterproofing and crack-bridging compound for internal and external use. It provides reliable waterproofing beneath ceramic tiles in showers, wet rooms, balconies and other areas subject to water exposure.\u003c\/p\u003e\n\u003ch3\u003eKey Benefits\u003c\/h3\u003e\n\u003cdiv class=\"sw-benefits-grid\"\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eTwo-component flexible waterproofing system\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eCrack-bridging capability up to 2mm\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eSuitable for internal and external use\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eIdeal for showers, wet rooms and balconies\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eCan tile directly onto the membrane once cured\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eFast curing — ready to tile in approximately 3 hours\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eExcellent adhesion to a wide range of substrates\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eComplies with EN 14891 waterproofing standards\u003c\/span\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch3\u003eApplication\u003c\/h3\u003e\n\u003cp\u003eMix the liquid and powder components together to form a smooth paste. Apply by brush or roller in two coats at right angles to each other. Allow to cure before tiling.\u003c\/p\u003e\n\u003ch3\u003eCoverage\u003c\/h3\u003e\n\u003cp\u003eApproximately 1.5 kg\/m² for two coats depending on substrate texture and porosity.\u003c\/p\u003e","brand":"ARDEX","offers":[{"title":"Single Bag (15kg)","offer_id":51124534313299,"sku":"ARDEX-15-15KG","price":147.54,"currency_code":"GBP","in_stock":true},{"title":"Half Pallet (30 x 15kg)","offer_id":53447341736275,"sku":"ARDEX-15-15KG-HP","price":4433.29,"currency_code":"GBP","in_stock":true},{"title":"Full Pallet (60 x 15kg)","offer_id":53447341769043,"sku":"ARDEX-15-15KG-FP","price":8866.58,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/6720\/9043\/files\/HJ3bauGGKMmU9OUP9ayqgAo_1_gps_generated.jpg?v=1792777572"},{"product_id":"ardex-wpc-waterproof-protection-system-10kg","title":"Ardex WPC Waterproof Protection System (White), 10kg","description":"\u003cp\u003eARDEX WPC is a two-component waterproof protection system for creating a fully tanked waterproof membrane beneath tiles in wet areas. The 10 kg kit includes both powder and liquid components, providing a flexible, brushable membrane suitable for showers, wet rooms and bathrooms.\u003c\/p\u003e\n\u003ch3\u003eKey Benefits\u003c\/h3\u003e\n\u003cdiv class=\"sw-benefits-grid\"\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eComplete tanking system in one kit\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eFlexible, brushable waterproof membrane\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eSuitable for showers, wet rooms and bathrooms\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eCrack-bridging capability when cured\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eCan tile directly onto cured membrane\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eTwo-component system for reliable performance\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eCompatible with ARDEX tile adhesive range\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eCompliant with EN 14891 waterproofing standards\u003c\/span\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch3\u003eApplication\u003c\/h3\u003e\n\u003cp\u003eMix the powder and liquid components together to create a smooth slurry. Apply by brush or roller in two coats at right angles. Allow approximately 90 minutes at 20°C before tiling with a suitable ARDEX adhesive.\u003c\/p\u003e\n\u003ch3\u003eCoverage\u003c\/h3\u003e\n\u003cp\u003eApproximately 1.5 kg\/m² combined weight for two coats. One 10 kg kit covers approximately 6–7 m².\u003c\/p\u003e","brand":"ARDEX","offers":[{"title":"Single Bag (10kg)","offer_id":51124534411603,"sku":"ARDEX-ARDEX-10KG","price":110.96,"currency_code":"GBP","in_stock":true},{"title":"Half Pallet (30 x 10kg)","offer_id":53447341801811,"sku":"ARDEX-ARDEX-10KG-HP","price":3210.03,"currency_code":"GBP","in_stock":true},{"title":"Full Pallet (60 x 10kg)","offer_id":53447341834579,"sku":"ARDEX-ARDEX-10KG-FP","price":6420.06,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/6720\/9043\/files\/pZzbao2pBICepMYPgIvqmAU_0_gps_generated.jpg?v=1792777452"},{"product_id":"ardex-sk-12-sealing-tape","title":"Ardex SK12 Sealing Tape, 50m x 12cm Roll","description":"\u003cp\u003eARDEX SK 12 is a pre-formed sealing tape for creating watertight corners in tiled wet areas. It integrates with ARDEX liquid waterproofing membranes to provide reliable corner sealing in showers, bathrooms and wet rooms, maintaining a continuous waterproof barrier.\u003c\/p\u003e\n\u003ch3\u003eKey Benefits\u003c\/h3\u003e\n\u003cdiv class=\"sw-benefits-grid\"\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003ePre-formed corner tape for fast installation\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eCreates watertight internal corners\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eIntegrates with ARDEX liquid waterproofing membranes\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eMaintains continuous waterproof barrier\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eSuitable for showers, bathrooms and wet rooms\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eFlexible to accommodate minor movement\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eAvailable for internal and external corners\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eCompliant with waterproofing system standards\u003c\/span\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch3\u003eApplication\u003c\/h3\u003e\n\u003cp\u003ePosition the SK 12 corner piece into the internal or external corner and bond into place using ARDEX S 7 Plus or other compatible ARDEX liquid waterproofing membrane. Ensure full overlap with adjacent membrane and sealing tape.\u003c\/p\u003e\n\u003ch3\u003eCoverage\u003c\/h3\u003e\n\u003cp\u003eOne piece per corner. Quantity depends on the number of corners in the wet area installation.\u003c\/p\u003e","brand":"ARDEX","offers":[{"title":"Default Title","offer_id":51124536803667,"sku":"ARDEX-12-STD","price":348.23,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/6720\/9043\/files\/gTrbarJDjs2kxg-wqfSJDw_1_gps_generated.jpg?v=1792752315"},{"product_id":"ardex-sk90","title":"Ardex SK 90 Tricom Inner Corner (single unit)","description":"\u003cp\u003eARDEX SK 90 is a preformed 90° internal corner from the ARDEX SK TRICOM sealing set. It provides flexible, watertight bridging of connection and movement joints in internal corners where walls meet each other or the floor, as part of an ARDEX bonded waterproofing system beneath tiles.\u003c\/p\u003e\n\u003ch3\u003eKey Benefits\u003c\/h3\u003e\n\u003cdiv class=\"sw-benefits-grid\"\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003ePreformed 90° internal corner, 120 mm leg length\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eFlexible and watertight across connection and movement joints\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eThin enough to be covered almost seamlessly by ARDEX sealing compounds\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eBonds well with sealing compounds and does not fold\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eEasy to cut to fit with a knife or scissors\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eFor water load classes W0-I to W3-I (DIN 18534)\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eTemperature resistant from -5°C to +60°C\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eWorks with ARDEX S 7 Plus, S1-K and SK 100 W TRICOM\u003c\/span\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch3\u003eApplication\u003c\/h3\u003e\n\u003cp\u003ePrepare the substrate as set out in the datasheet for the chosen ARDEX sealing compound. Apply the sealing compound, immediately bed the SK 90 corner into it and press firmly in with a smoothing trowel. Overlap adjacent SK TRICOM tape and collars by at least 5 cm. Once all set components are in place, apply the bonded waterproofing in two layers with the same sealing compound, leaving the movement space below the joint free of compound.\u003c\/p\u003e\n\u003ch3\u003eCoverage\u003c\/h3\u003e\n\u003cp\u003eOne corner per internal corner. Sold as a single unit (manufacturer pack is 10).\u003c\/p\u003e","brand":"ARDEX","offers":[{"title":"Default Title","offer_id":51124537196883,"sku":"ARDEX-90-STD","price":28.04,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/6720\/9043\/files\/FD3batfZKJGN9OUP8-GDoQs_0_gps_generated.jpg?v=1792752993"},{"product_id":"ardex-p51-primer-and-bonding-agent-25kg","title":"Ardex P51 Primer and Bonding Agent, 25kg","description":"\u003cp\u003eARDEX P 51 is a concentrated, blue, water-based, solvent-free primer and bonding agent for floors, walls and ceilings. Diluted with water to suit the substrate, it controls suction, minimises air bubbles and improves adhesion for ARDEX levelling compounds, tile adhesives and screeds.\u003c\/p\u003e\n\u003ch3\u003eKey Benefits\u003c\/h3\u003e\n\u003cdiv class=\"sw-benefits-grid\"\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eConcentrated formula — up to 160m² per 5kg at 1:5\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eControls suction on absorbent substrates\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eImproves adhesion of applied materials\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003ePrevents premature drying\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eSuitable for large commercial areas\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eDilute from 1:½ to 1:5 with water, depending on substrate\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eApply with a soft broom or brush\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eCompatible with ARDEX levelling and screed range\u003c\/span\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch3\u003eApplication\u003c\/h3\u003e\n\u003cp\u003eShake well and dilute with water at the ratio for the substrate — from 1:½ up to 1:5, or undiluted on timber floors. Apply evenly with a soft broom or brush and leave to dry to a clear, thin blue film before further work. Apply above 5°C.\u003c\/p\u003e\n\u003ch3\u003eCoverage\u003c\/h3\u003e\n\u003cp\u003eApprox. coverage per 5kg of ARDEX P 51: 25m² undiluted or at 1:½, 33m² at 1:1, 60m² at 1:2, 100m² at 1:3 and 160m² at 1:5. Varies with substrate roughness and absorbency.\u003c\/p\u003e","brand":"ARDEX","offers":[{"title":"Single Bag (25kg)","offer_id":51124553810259,"sku":"ARDEX-P51-25KG","price":258.52,"currency_code":"GBP","in_stock":true},{"title":"Half Pallet (20 x 25kg)","offer_id":53447346159955,"sku":"ARDEX-P51-25KG-HP","price":4985.71,"currency_code":"GBP","in_stock":true},{"title":"Full Pallet (40 x 25kg)","offer_id":53447346192723,"sku":"ARDEX-P51-25KG-FP","price":9971.42,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/6720\/9043\/files\/kpbbavXVHZaO9OUPvOXEgQk_2_gps_generated.jpg?v=1792775955"},{"product_id":"ardex-r3e-moisture-tolerant-epoxy-primer","title":"Ardex R3E Moisture Tolerant Epoxy Primer","description":"\u003cp\u003eARDEX R 3E is a moisture-tolerant, solvent-free two-component epoxy primer for damp cementitious floors. Adhesion promoter and bonding agent — not a moisture barrier: where substrate RH exceeds 75%, use ARDEX DPM 1 C first.\u003c\/p\u003e\n\u003ch3\u003eKey Benefits\u003c\/h3\u003e\n\u003cdiv class=\"sw-benefits-grid\"\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eMoisture tolerant for damp concrete\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eSolvent-free for safe indoor use\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eNot a DPM — use ARDEX DPM 1 C above 75% RH\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eExcellent adhesion promoter\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eCompatible with ARDEX levelling compounds\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eTwo-component for reliable performance\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eApply by roller or brush\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eOvercoatable in 8 hours at 20°C\u003c\/span\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch3\u003eApplication\u003c\/h3\u003e\n\u003cp\u003eMix Component A and B. Apply by roller or brush to the prepared substrate at the recommended coverage rate.\u003c\/p\u003e\n\u003ch3\u003eCoverage\u003c\/h3\u003e\n\u003cp\u003eCoverage approx. 200–300 g\/m² per coat. Refer to technical datasheet.\u003c\/p\u003e","brand":"ARDEX","offers":[{"title":"6kg","offer_id":51124555153747,"sku":"ARDEX-ARDEX-STD","price":143.79,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/6720\/9043\/files\/TZXbaprUBtGL9OUPos_sgQc_1_gps_generated.jpg?v=1792775561"},{"product_id":"weberfloor-dpm-56kg","title":"Weberfloor DPM, 5.6kg","description":"\u003cp\u003eWeberfloor DPM is a two-component, solvent-free epoxy damp-proof membrane designed to suppress residual moisture in concrete subfloors prior to the application of levelling compounds and floor coverings. Supplied as a 5.6kg kit, it provides a reliable moisture barrier that protects floor finishes from damage caused by residual construction moisture up to 98% RH.\u003c\/p\u003e\n\u003ch3\u003eKey Benefits\u003c\/h3\u003e\n\u003cdiv class=\"sw-benefits-grid\"\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eSuppresses residual construction moisture in concrete substrates\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eSolvent-free epoxy formulation — low odour, suitable for occupied buildings\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eTwo-component system for easy on-site mixing\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eCompatible with Weber levelling compounds and floor adhesives\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eCan be overcoated with levelling compound once cured\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003e5.6kg kit covers a practical working area per application\u003c\/span\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch3\u003eApplication\u003c\/h3\u003e\n\u003cp\u003eMix both components thoroughly until a uniform colour is achieved. Apply to the clean, prepared concrete substrate using a roller or squeegee in a single even coat. Allow to cure fully (typically 3 hours) before applying Weber levelling compounds. Broadcast dry quartz sand into the wet DPM to create a key for subsequent layers. Do not apply below 5°C.\u003c\/p\u003e\n\u003ch3\u003eCoverage\u003c\/h3\u003e\n\u003cp\u003eApproximately 0.37L per m² per coat. The 5.6kg kit covers approximately 12.8m² in a single coat application (at 350μm).\u003c\/p\u003e","brand":"WEBER","offers":[{"title":"Single Bag (5.6kg)","offer_id":51124565016915,"sku":"WEBER-WEBERFLOOR-5.6KG","price":142.24,"currency_code":"GBP","in_stock":true},{"title":"Half Pallet (40 x 5.6kg)","offer_id":53447347601747,"sku":"WEBER-WEBERFLOOR-5.6KG-HP","price":5461.86,"currency_code":"GBP","in_stock":true},{"title":"Full Pallet (80 x 5.6kg)","offer_id":53447347667283,"sku":"WEBER-WEBERFLOOR-5.6KG-FP","price":10013.41,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/6720\/9043\/files\/p5DbasHlN9GL9OUPos_sgQc_0_gps_generated.jpg?v=1792774384"},{"product_id":"weberfloor-mvs-14l","title":"Weberfloor MVS, 14L","description":"\u003cp\u003eWeberfloor MVS is a water-based moisture vapour suppressant designed to suppress the passage of residual construction moisture up to 95% RH (as measured with a hood hygrometer). It provides a reliable moisture barrier that allows floorcoverings and levelling compounds to be applied over subfloors that have not fully dried.\u003c\/p\u003e\n\u003ch3\u003eKey Features:\u003c\/h3\u003e\n\u003cdiv class=\"sw-benefits-grid\"\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eSuppresses moisture vapour up to 95% RH\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eWater-based formula — low odour and easy to apply\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eTwo-coat application with a short pile roller\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eCan be overcoated in as little as 60 minutes\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eMinimum film thickness: 150 μm per coat\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eMust be overcoated with weberfloor 4150 or 4160 within 24 hours\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eSubstrate must have pull-off strength of at least 1 MPa\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eSupplied in 14-litre containers\u003c\/span\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003eNote: Not suitable for substrates without a structural DPM or readings above 95% RH. For higher moisture levels, consider a full epoxy DPM system.\u003c\/p\u003e","brand":"WEBER","offers":[{"title":"Default Title","offer_id":51124565475667,"sku":"WEBER-14L-14L","price":267.89,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/6720\/9043\/files\/M5Dbauq-OuD_pMYPru2b0QM_0_gps_generated.jpg?v=1792774261"},{"product_id":"eco-prim-grip-plus-5kg","title":"ECO PRIM GRIP PLUS, 5kg","description":"\u003cp\u003eMapei ECO PRIM GRIP PLUS is a ready-to-use, high-performance bonding primer for interior and exterior floors and walls. Its enhanced formula provides exceptional adhesion on both porous and non-porous substrates including existing tiles, timber, metal and concrete, ensuring a reliable bond for levelling compounds, tile adhesives and paints.\u003c\/p\u003e\n\u003ch3\u003eKey Benefits\u003c\/h3\u003e\n\u003cdiv class=\"sw-benefits-grid\"\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eSuitable for porous and non-porous surfaces\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eInterior and exterior use\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eReady to use — no mixing required\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eQuick drying — typically 1–3 hours\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eEco-friendly, low-VOC formulation\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eExcellent bond strength on difficult substrates\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eTintable pink colour for easy visual confirmation of coverage\u003c\/span\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch3\u003eApplication\u003c\/h3\u003e\n\u003cp\u003eStir thoroughly before use. Apply an even coat by brush, roller or spray directly onto the clean, dry substrate. Allow to dry until touch-dry and slightly tacky (typically 1–3 hours depending on conditions) before applying the next layer. Do not dilute. Apply at temperatures between +5°C and +35°C.\u003c\/p\u003e\n\u003ch3\u003eCoverage\u003c\/h3\u003e\n\u003cp\u003eApproximately 200–300 g\/m² per coat depending on substrate porosity. One 5 kg tub covers approximately 17–25 m² per coat.\u003c\/p\u003e","brand":"MAPEI","offers":[{"title":"5kg","offer_id":51124566753619,"sku":"SCREEDWORKS-PRIM-5KG","price":47.99,"currency_code":"GBP","in_stock":true},{"title":"10kg","offer_id":51124566786387,"sku":"MAPEI-ECOGRIPPLUS-10KG","price":90.69,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/6720\/9043\/files\/LjfbasHBKeKO9OUP3_yG4AY_1_gps_generated_50ac6c5b-61e0-4edb-8cf0-c679c81295ec.jpg?v=1792753381"},{"product_id":"eco-prim-grip-plus-10kg","title":"Mapei Eco Prim Grip Plus, 10kg","description":"\u003cp\u003eMapei Eco Prim Grip Plus is a ready-to-use, synthetic resin-based bonding primer with quartz aggregate designed to promote adhesion on smooth, non-absorbent surfaces. It creates a textured key coat that allows levelling compounds, screeds, and tile adhesives to bond securely to difficult substrates such as existing tiles, terrazzo, and painted concrete.\u003c\/p\u003e\n\u003ch3\u003eKey Benefits\u003c\/h3\u003e\n\u003cdiv class=\"sw-benefits-grid\"\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eCreates a textured key coat on smooth, non-absorbent surfaces\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eReady to use — no mixing required\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eSuitable for existing tiles, terrazzo, painted concrete, and metal\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eLow VOC emissions — eco-friendly formulation\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eCompatible with Mapei levelling compounds and adhesives\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003e10kg container for efficient coverage on larger areas\u003c\/span\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch3\u003eApplication\u003c\/h3\u003e\n\u003cp\u003eStir well before use. Apply Eco Prim Grip Plus evenly to the clean, dry substrate using a brush, roller, or trowel. Allow to dry until the surface feels tacky and sandpaper-like (typically 1–3 hours depending on conditions). Apply the levelling compound, screed, or adhesive directly onto the primed surface. Do not apply below 5°C.\u003c\/p\u003e\n\u003ch3\u003eCoverage\u003c\/h3\u003e\n\u003cp\u003eApproximately 200–300g per m² in a single coat. The 10kg container covers approximately 33–50m².\u003c\/p\u003e","brand":"MAPEI","offers":[{"title":"Single Bag (10kg)","offer_id":51124569833811,"sku":"SCREEDWORKS-PRIM-10KG","price":86.99,"currency_code":"GBP","in_stock":true},{"title":"Half Pallet (30 x 10kg)","offer_id":53447347765587,"sku":"SCREEDWORKS-PRIM-10KG-HP","price":2720.4,"currency_code":"GBP","in_stock":true},{"title":"Full Pallet (60 x 10kg)","offer_id":53447347831123,"sku":"SCREEDWORKS-PRIM-10KG-FP","price":5440.8,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/6720\/9043\/files\/LjfbasHBKeKO9OUP3_yG4AY_1_gps_generated.jpg?v=1792751480"},{"product_id":"ecoprim-t-plus-5kg","title":"Mapei Eco Prim T Plus Multi-Purpose Primer","description":"\u003cp\u003eMapei Eco Prim T Plus is a solvent-free, multi-purpose primer for use before the application of levelling compounds, tile adhesives and waterproofing membranes. It regulates porosity on absorbent substrates such as concrete, sand–cement screeds and anhydrite, while also improving adhesion on non-absorbent surfaces like existing tiles and vinyl.\u003c\/p\u003e\n\u003ch3\u003eKey Benefits\u003c\/h3\u003e\n\u003cdiv class=\"sw-benefits-grid\"\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eMulti-purpose — works on absorbent and non-absorbent substrates\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eSolvent-free, low-VOC formulation\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eReady to use — no mixing required\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eQuick drying — typically 30–60 minutes\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eConsolidates dusty or friable surfaces\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eCompatible with the full Mapei levelling and adhesive range\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eSuitable for underfloor heating systems\u003c\/span\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch3\u003eApplication\u003c\/h3\u003e\n\u003cp\u003eShake or stir well before use. For absorbent substrates, dilute 1:3 with water and apply evenly by roller or brush. For non-absorbent substrates, apply undiluted. Allow to dry completely (30–60 minutes depending on conditions) until the surface is touch-dry before overcoating. Do not apply below +5°C or above +35°C. Do not allow to puddle.\u003c\/p\u003e\n\u003ch3\u003eCoverage\u003c\/h3\u003e\n\u003cp\u003eDiluted 1:3 on absorbent substrates: approximately 100–150 g\/m². Undiluted on non-absorbent substrates: approximately 150–200 g\/m². One 5 kg container covers approximately 25–50 m² depending on dilution and porosity.\u003c\/p\u003e","brand":"MAPEI","offers":[{"title":"5kg","offer_id":51124571898195,"sku":"MAPEI-ECOPRIM-5KG","price":52.74,"currency_code":"GBP","in_stock":true},{"title":"20kg","offer_id":51124571930963,"sku":"MAPEI-ECOPRIM-20KG","price":193.14,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/6720\/9043\/files\/iUrbau6wBseQpMYP8N3AgA8_1_gps_generated.jpg?v=1792756428"},{"product_id":"mapeband-120-mm-wide-50m","title":"Mapei Mapeband Rubber Waterproofing Tape, 120mm x 50m Roll","description":"\u003cp\u003eMapei Mapeband is an alkali-resistant rubber tape with felt, for sealing joints, wall-to-wall and wall-to-floor corners in cementitious waterproofing systems and liquid membranes. Supplied in 120mm wide rolls; this listing is the 50m roll.\u003c\/p\u003e\n\u003ch3\u003eKey Benefits\u003c\/h3\u003e\n\u003cdiv class=\"sw-benefits-grid\"\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eAlkali-resistant rubber with felt edges for a strong bond into the membrane\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eElastic and deformable: follows movement at joints and corners\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eService temperature from -30°C to +60°C\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eMatching 90° and 270° corners and pipe seals available from Mapei\u003c\/span\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"MAPEI","offers":[{"title":"Default Title","offer_id":51124577272147,"sku":"MAPEI-120-120MM","price":311.77,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/6720\/9043\/files\/SY_basCHN4CepMYPgIvqmAU_0_gps_generated.jpg?v=1792774027"},{"product_id":"mapeband-internal-corner","title":"Mapei Mapeband Internal Corner","description":"\u003cp\u003eMAPEBAND Internal Corner pieces are pre-formed alkali-resistant rubber tape corners with polyester felt backing, designed for waterproof sealing at internal (concave) corners in wet rooms, bathrooms, showers, and other areas requiring reliable waterproofing. They ensure a continuous, leak-free membrane at the most vulnerable junction points.\u003c\/p\u003e\n\u003ch3\u003eKey Features:\u003c\/h3\u003e\n\u003cdiv class=\"sw-benefits-grid\"\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003ePre-formed internal corner for fast, accurate installation\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eAlkali-resistant rubber for long-term durability in wet environments\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003ePolyester felt backing bonds securely to waterproofing membranes\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eCompatible with MAPEI cementitious waterproofing systems including Mapelastic and Mapegum WPS\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eCritical for maintaining waterproof integrity at wall-to-floor and wall-to-wall junctions\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eSold individually\u003c\/span\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"MAPEI","offers":[{"title":"Default Title","offer_id":51124577763667,"sku":"MAPEI-MAPEBAND-STD","price":10.77,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/6720\/9043\/files\/6I3barrCB9GL9OUPos_sgQc_0_gps_generated_815a8429-0871-4531-a002-76e431244d18.jpg?v=1792780312"},{"product_id":"mapeband-external-corner","title":"Mapei Mapeband External Corner","description":"\u003cp\u003eMapei Mapeband External Corner pieces are pre-formed corners in alkali-resistant rubber with polyester felt backing, for waterproof sealing at external (convex) corners in wet rooms, showers and bathrooms. Used with Mapei cementitious waterproofing systems and liquid membranes, the moulded shape guarantees a continuous, leak-free seal at the most awkward detail on the job — without folding or cutting flat tape.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey benefits\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePre-formed for a perfect fit at external corners — no folding or origami with flat tape\u003c\/li\u003e\n\u003cli\u003eAlkali-resistant rubber with felt edges for a strong bond into the membrane\u003c\/li\u003e\n\u003cli\u003eMaintains waterproofing continuity with Mapeband tape runs\u003c\/li\u003e\n\u003cli\u003eIn-service temperature range from −30°C to +60°C\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MAPEI","offers":[{"title":"Default Title","offer_id":51124580221267,"sku":"MAPEI-MAPEBAND-STD","price":10.77,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/6720\/9043\/files\/yI7bas72McmU9OUP9ayqgAo_3_gps_generated.jpg?v=1792773899"},{"product_id":"mapeband-outlet-gasket-400x400mm","title":"Mapei Mapeband Outlet Gasket, 400x400mm","description":"\u003cp\u003eThe Mapei Mapeband Outlet Gasket (400 × 400 mm) is a pre-formed alkali-resistant rubber gasket with felt backing, for creating a watertight seal around floor drains and outlets in tiled wet areas. Embedded into Mapei cementitious waterproofing membranes such as Mapelastic, it maintains membrane continuity at the drain — the single most common leak point in a wet room floor.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey benefits\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePre-formed 400 × 400 mm gasket for floor outlets and drains\u003c\/li\u003e\n\u003cli\u003eAlkali-resistant rubber with felt for a secure bond into the membrane\u003c\/li\u003e\n\u003cli\u003eMaintains waterproofing continuity at penetrations\u003c\/li\u003e\n\u003cli\u003eIn-service temperature range from −30°C to +60°C\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MAPEI","offers":[{"title":"Default Title","offer_id":51124580942163,"sku":"MAPEI-MAPEBAND-400X400","price":31.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/6720\/9043\/files\/WI7bati6Ceq0pMYPvIr2iA4_0_gps_generated.jpg?v=1792773781"},{"product_id":"mapeband-pe120-roll-5m-10m","title":"Mapei Mapeband PE 120 Waterproofing Tape, 120mm x 10m Roll","description":"\u003cp\u003eMapei MAPEBAND PE120 is a flexible, thermoplastic elastomer waterproofing tape coated with non-woven polypropylene on both sides. Designed for sealing joints and transitions in wet areas, it integrates seamlessly with cementitious waterproofing systems such as Mapelastic and Mapegum. Available in 5 m and 10 m rolls.\u003c\/p\u003e\n\u003ch3\u003eKey Benefits\u003c\/h3\u003e\n\u003cdiv class=\"sw-benefits-grid\"\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eHigh flexibility — accommodates movement at joints and corners\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eDual-sided polypropylene coating for excellent cementitious bond\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eResistant to water, alkalis and ageing\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003e120 mm width provides generous overlap\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eCompatible with Mapelastic, Mapegum and other Mapei waterproofing systems\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eSuitable for showers, wet rooms, balconies and swimming pools\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eEasy to cut and position on site\u003c\/span\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch3\u003eApplication\u003c\/h3\u003e\n\u003cp\u003eEmbed MAPEBAND PE120 into a fresh coat of Mapelastic or Mapegum WPS applied to the joint or transition. Press firmly with a spatula to eliminate air pockets and ensure full contact on both sides. Apply a second coat of waterproofing membrane over the tape once the first layer is touch-dry. Ensure minimum 50 mm overlap at tape joins. Apply at temperatures between +5°C and +35°C.\u003c\/p\u003e\n\u003ch3\u003eCoverage\u003c\/h3\u003e\n\u003cp\u003eLinear coverage depends on joint layout. One 10 m roll covers 10 linear metres of joints. Allow approximately 10–15% extra for overlaps at corners and junctions.\u003c\/p\u003e","brand":"MAPEI","offers":[{"title":"Default Title","offer_id":51124582515027,"sku":"MAPEI-10M-STD","price":62.34,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/6720\/9043\/files\/Mapei-Mapeband-PE120.jpg?v=1749025931"},{"product_id":"mapeband-pe120-external-angles-each","title":"Mapei Mapeband PE120 External Angles","description":"\u003cp\u003eMapei Mapeband PE120 External Angles are pre-formed 90-degree corner pieces for waterproofing external angles in wet rooms, bathrooms, and shower areas. Manufactured from polyester mesh bonded to impermeable PVC fabric, these elastic profiles provide seamless waterproofing at critical external corner junctions. Designed for use with the Mapegum WPS liquid membrane system.\u003c\/p\u003e\n\u003ch3\u003eKey Benefits\u003c\/h3\u003e\n\u003cdiv class=\"sw-benefits-grid\"\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003ePre-formed 90° external corner — no field fabrication required\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003ePolyester mesh and PVC construction for lasting waterproof integrity\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eElastic composition accommodates minor building movement\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eHigh elongation at break (\u0026gt;135%) for superior flexibility\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eWater pressure resistance of 1.5 bar\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eService temperature range: −5°C to +30°C\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003e120mm width provides comprehensive corner coverage\u003c\/span\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch3\u003eApplication\u003c\/h3\u003e\n\u003cp\u003eApply Mapegum WPS at 1mm minimum thickness to both surfaces of the corner junction. While the membrane is still fresh, embed the mesh portion of the corner piece using a smooth trowel. Allow to cure (approximately 5 hours at 20°C) before applying subsequent membrane layers. For absorbent substrates, pre-treat with Mapei Primer G (diluted 1:1 to 1:2 with water).\u003c\/p\u003e\n\u003ch3\u003eCoverage\u003c\/h3\u003e\n\u003cp\u003eOne pre-formed corner piece per unit. Tape thickness: 0.7mm; width: 120mm. Use in conjunction with Mapegum WPS (approximately 1.2 kg\/m² in two coats).\u003c\/p\u003e","brand":"MAPEI","offers":[{"title":"Default Title","offer_id":51124583006547,"sku":"MAPEI-MAPEBAND-STD","price":58.97,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/6720\/9043\/files\/Mapei-PE120-Internall-Corner.jpg?v=1749025944"},{"product_id":"mapeband-pe120-internal-angles","title":"Mapei Mapeband PE120 Internal Angles","description":"\u003cp\u003eMapei Mapeband PE120 Internal Angles are pre-formed 90° corner pieces for waterproofing internal (concave) corners in wet rooms, bathrooms and showers. Made from polyester mesh bonded to PVC fabric that is impermeable to water and vapour, they integrate with Mapeband PE120 tape runs and Mapei waterproofing membranes to give a continuous, leak-free seal at wall-floor and wall-wall junctions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey benefits\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePre-formed 90° internal corner — accurate detailing without folding tape\u003c\/li\u003e\n\u003cli\u003ePolyester mesh and PVC construction, impermeable to water and vapour\u003c\/li\u003e\n\u003cli\u003eElastic and deformable to accommodate minor movement\u003c\/li\u003e\n\u003cli\u003eIntegrates with Mapeband PE120 tape and Mapei liquid\/cementitious membranes\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MAPEI","offers":[{"title":"Default Title","offer_id":51124583498067,"sku":"MAPEI-MAPEBAND-STD","price":58.97,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/6720\/9043\/files\/6I3barrCB9GL9OUPos_sgQc_0_gps_generated.jpg?v=1792773672"},{"product_id":"mapeband-pipe-gasket-118x118mm","title":"Mapei Mapeband Pipe Gasket, 118x118mm","description":"\u003cp\u003eMapei Mapeband Pipe Gasket is a pre-formed rubber gasket designed to create a watertight seal around pipe penetrations through waterproofed floors and walls. Measuring 118 x 118mm, it integrates with Mapei's Mapelastic and Mapegum WPS waterproofing systems to maintain membrane continuity at pipe entry points.\u003c\/p\u003e\n\u003ch3\u003eKey Benefits\u003c\/h3\u003e\n\u003cdiv class=\"sw-benefits-grid\"\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003ePre-formed shape for fast, reliable installation around pipes\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eCreates a watertight seal at pipe penetrations\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eCompatible with Mapei Mapelastic and Mapegum WPS systems\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eFlexible rubber accommodates minor movement\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eEliminates the need for custom-cut membrane patches\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eIdeal for wet rooms, bathrooms, and tanked areas\u003c\/span\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch3\u003eApplication\u003c\/h3\u003e\n\u003cp\u003eApply a coat of Mapei Mapelastic or Mapegum WPS to the substrate around the pipe penetration. Press the gasket firmly into the wet membrane, ensuring full contact and no air pockets. Apply a second coat of membrane over the gasket flanges to encapsulate fully. Allow to cure as per the membrane product instructions.\u003c\/p\u003e\n\u003ch3\u003eCoverage\u003c\/h3\u003e\n\u003cp\u003eOne gasket per pipe penetration. Size: 118 x 118mm. Suitable for standard pipe diameters — check compatibility with the pipe size before installation.\u003c\/p\u003e","brand":"MAPEI","offers":[{"title":"Default Title","offer_id":51124584251731,"sku":"MAPEI-MAPEBAND-118X118","price":12.36,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/6720\/9043\/files\/eY3bapWTCOD_pMYPru2b0QM_0_gps_generated.jpg?v=1792773560"},{"product_id":"mapeband-sa-roll-25m","title":"Mapei Mapeband SA Sealing Tape Roll, 25m","description":"\u003cp\u003eMapeband SA is a self-adhesive tape made from butyl rubber with alkali-resistant, non-woven polypropylene fabric bonded on the outer surface that guarantees excellent adhesion for the waterproofing system to be applied over it. Mapeband SA adheres to various types of non-absorbent substrates such as aluminium, copper, steel, plastic, bitumen waterproofing membranes, ceramic and to absorbent substrates such as concrete, masonry, aerated concrete, fibre-reinforced cement and render.\u003c\/p\u003e\n\u003ch3\u003eKey Benefits\u003c\/h3\u003e\n\u003cdiv class=\"sw-benefits-grid\"\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003ebitumen waterproofing membranes\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eceramic and to absorbent substrates such as concrete\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eaerated concrete\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003efibre-reinforced cement and render.\u003c\/span\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"MAPEI","offers":[{"title":"Default Title","offer_id":51124585234771,"sku":"MAPEI-25M-STD","price":282.31,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/6720\/9043\/files\/mapei-mapeband-sa-roll.png?v=1749025957"},{"product_id":"mapeband-tpe-170-roll-30m","title":"Mapei Mapeband TPE 170 Roll, 30m","description":"\u003cp\u003eMapei Mapeband TPE 170 is a thermoplastic elastomer (TPE) tape, 170 mm wide and supplied in 30 m rolls, for the flexible sealing and waterproofing of expansion joints and cracks subject to movement. It remains permanently flexible, even at low temperatures, and bonds into cementitious waterproofing systems such as Mapelastic and Mapelastic Smart, as well as urethane and epoxy membranes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey benefits\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePermanently flexible TPE — accommodates repeated joint movement\u003c\/li\u003e\n\u003cli\u003eRetains flexibility at low temperatures\u003c\/li\u003e\n\u003cli\u003eCompatible with Mapelastic, Mapelastic Smart and resin-based membranes\u003c\/li\u003e\n\u003cli\u003e170 mm width for standard expansion joints; see the 325 mm version for wider joints\u003c\/li\u003e\n\u003cli\u003e30 m roll\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MAPEI","offers":[{"title":"Default Title","offer_id":51124585365843,"sku":"MAPEI-170-STD","price":800.88,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/6720\/9043\/files\/xYzbapHHFNbGpMYPzMzYyQ8_1_gps_generated.jpg?v=1792773394"},{"product_id":"mapeband-tpe-325-roll-30m","title":"Mapei Mapeband TPE 325 Roll, 30m","description":"\u003cp\u003eMapei Mapeband TPE 325 is a thermoplastic elastomer (TPE) tape, 325 mm wide and supplied in 30 m rolls, for the flexible sealing and waterproofing of wide expansion joints and structural cracks subject to significant movement. The extra width provides greater movement capacity than the 170 mm version. It remains permanently flexible, even at low temperatures, and bonds into cementitious waterproofing systems such as Mapelastic and Mapelastic Smart, as well as urethane and epoxy membranes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey benefits\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e325 mm width for wide joints and larger movement capacity\u003c\/li\u003e\n\u003cli\u003ePermanently flexible TPE, even at low temperatures\u003c\/li\u003e\n\u003cli\u003eCompatible with Mapelastic, Mapelastic Smart and resin-based membranes\u003c\/li\u003e\n\u003cli\u003e30 m roll\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MAPEI","offers":[{"title":"Default Title","offer_id":51124585791827,"sku":"MAPEI-325-STD","price":1402.31,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/6720\/9043\/files\/mapeband-tpe-170.jpg?v=1749025964"},{"product_id":"mapelastic-ab-unit-16kg-30kg","title":"Mapei Mapelastic A+B Two-Part Waterproofing Kit, 32kg","description":"\u003cp\u003eMapei Mapelastic is a two-component, flexible cementitious membrane for waterproofing concrete, render and screed surfaces. The complete 32 kg kit contains a 24 kg bag of powder (Component A) and an 8 kg (7.9 L) bottle of liquid latex (Component B), mixed together on site to form a crack-bridging, elastic waterproof coating for balconies, terraces, bathrooms, wet rooms and swimming pools prior to tiling.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey benefits\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eComplete two-part kit: 24 kg powder + 8 kg (7.9 L) liquid latex — 32 kg total\u003c\/li\u003e\n\u003cli\u003eFlexible, crack-bridging membrane accommodates substrate movement\u003c\/li\u003e\n\u003cli\u003eWaterproofs balconies, terraces, wet rooms and pools beneath tiles\u003c\/li\u003e\n\u003cli\u003eBrush, trowel or spray applied over concrete, render and screeds\u003c\/li\u003e\n\u003cli\u003eUse with Mapeband tape and corner pieces for sealed joints and penetrations\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MAPEI","offers":[{"title":"Single Kit (32kg: 24kg powder + 8kg liquid)","offer_id":51124590936403,"sku":"SCREEDWORKS-MAPELASTIC-32KG","price":193.28,"currency_code":"GBP","in_stock":true},{"title":"Half Pallet (30 x 32kg kits)","offer_id":53447349829971,"sku":"SCREEDWORKS-MAPELASTIC-32KG-HP","price":5798.4,"currency_code":"GBP","in_stock":true},{"title":"Full Pallet (60 x 32kg kits)","offer_id":53447349993811,"sku":"SCREEDWORKS-MAPELASTIC-32KG-FP","price":11596.8,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/6720\/9043\/files\/BkjbavvyF4KxpMYPsIzKiQo_1_gps_generated.jpg?v=1792755785"},{"product_id":"primer-g-1kg-5kg-25kg","title":"PRIMER G, 1kg - 5kg - 25kg","description":"\u003cp\u003eSynthetic resin primer in water dispersion with a very low content of volatile organic compounds (VOC). Where to use:\n\n\nFor treating gypsum surfaces prior to installing ceramic tiles.\u003c\/p\u003e\n\u003ch3\u003eKey Benefits\u003c\/h3\u003e\n\u003cdiv class=\"sw-benefits-grid\"\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eAs an anchoring coat for gypsum-based sprayable plasters.\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eTo improve the adhesion of smoothing compounds on cementitious or anhydrite and gypsum-based surfaces.\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eTo provide uniform absorption in cementitious or gypsum surfaces.\u003c\/span\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"MAPEI","offers":[{"title":"1kg","offer_id":51124591460691,"sku":"MAPEI-PRIMER-1KG","price":10.75,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/6720\/9043\/files\/hIrbapjPCtaMpMYP26Os-QM_0_gps_generated.jpg?v=1792772810"},{"product_id":"tekprime-5ltr","title":"Tekprime, 5ltr","description":"\u003cp\u003eTekprime is an acrylic-based primer designed to prepare concrete and cementitious substrates before the application of screeds, levelling compounds, and adhesives. Supplied in a 5-litre container, it regulates substrate porosity and improves adhesion, ensuring a reliable bond between the substrate and subsequent layers.\u003c\/p\u003e\n\u003ch3\u003eKey Benefits\u003c\/h3\u003e\n\u003cdiv class=\"sw-benefits-grid\"\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eRegulates substrate porosity for consistent adhesion\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eImproves bond strength between substrate and screed or leveller\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eSuitable for porous and non-porous substrates\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eReady to use — no mixing required\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eQuick drying for fast project turnaround\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003e5-litre container for efficient coverage on larger areas\u003c\/span\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch3\u003eApplication\u003c\/h3\u003e\n\u003cp\u003eEnsure the substrate is clean, sound, and free from dust, grease, and loose material. Apply Tekprime undiluted using a roller, brush, or spray. For highly porous substrates, a second coat may be required once the first coat has dried. Allow the primer to dry to a tacky finish before applying the screed or levelling compound. Do not apply below 5°C or in conditions where condensation may form.\u003c\/p\u003e\n\u003ch3\u003eCoverage\u003c\/h3\u003e\n\u003cp\u003eApproximately 5–10m² per litre depending on substrate porosity. The 5-litre container covers approximately 25–50m² in a single coat.\u003c\/p\u003e","brand":"TEKCEM","offers":[{"title":"Default Title","offer_id":51124631208275,"sku":"TEKCEM-TEKPRIME-STD","price":47.52,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/6720\/9043\/files\/hITbauvyFpGN9OUP8-GDoQs_0_gps_generated.jpg?v=1792771276"},{"product_id":"tekgrip-25kg","title":"Tekgrip, 25kg","description":"\u003cp\u003eTekgrip is a ready-to-use premixed primer with a gripping aggregate, designed for use as a bonding layer between substrates and levelling screeds or tiling. Supplied in 25kg units, it dries to a textured surface, creating a strong bond that ensures the screed adheres securely to the substrate, preventing delamination and hollow spots.\u003c\/p\u003e\n\u003ch3\u003eKey Benefits\u003c\/h3\u003e\n\u003cdiv class=\"sw-benefits-grid\"\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eGripping aggregate for enhanced bond strength\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003ePrevents delamination between substrate and screed\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eSuitable for use with Tekcem levelling screeds and tiling\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003ePremixed — apply by roller or brush\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eCan be used on concrete, screed, and non-absorbent substrates\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003e25kg unit for efficient site coverage\u003c\/span\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch3\u003eApplication\u003c\/h3\u003e\n\u003cp\u003eShake Tekgrip well before use. Apply a uniform coat to the prepared substrate using a roller (brush in corners), ensuring it does not pool. Allow to dry — touch dry in approximately 20 minutes — before screeding or tiling. Ensure the substrate is clean, mechanically prepared, and free from contaminants prior to application. Do not apply below 5°C.\u003c\/p\u003e\n\u003ch3\u003eCoverage\u003c\/h3\u003e\n\u003cp\u003eApproximately 0.075–0.11kg per m² depending on surface porosity and texture.\u003c\/p\u003e","brand":"TEKCEM","offers":[{"title":"5kg","offer_id":51124632125779,"sku":"TEKCEM-TEKGRIP-25KG","price":38.34,"currency_code":"GBP","in_stock":false},{"title":"25kg","offer_id":51124632158547,"sku":"TEKCEM-GRIP-25KG","price":178.25,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/6720\/9043\/files\/EITbaue-N8eQpMYP8N3AgA8_1_gps_generated.jpg?v=1792771162"},{"product_id":"tekcem-sf-membrane-red-black-5kg-10kg","title":"Tekcem SF Membrane Red\/Black, 5kg - 10kg","description":"\u003cp\u003eTekcem SF Membrane is a solvent-free, two-pack epoxy resin surface damp proof membrane applied in two coats (white base coat, red second coat). It is designed to suppress residual construction moisture in concrete and sand\/cement substrates prior to the installation of floor coverings.\u003c\/p\u003e\n\u003ch3\u003eKey Benefits\u003c\/h3\u003e\n\u003cdiv class=\"sw-benefits-grid\"\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eTwo-pack epoxy DPM — mix components before use\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eEffective moisture barrier against residual construction moisture\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eWhite base coat and red second coat provide clear visual coverage indication\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eSecond coat after 6 hours (tack free), within 24 hours\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eBonds directly to concrete and sand\/cement screeds\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eSuitable as a primer and DPM in one system\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eAvailable in 5 kg and 10 kg containers\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eCompatible with levelling compounds and tile adhesives\u003c\/span\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"TEKCEM","offers":[{"title":"Single Bag (5kg)","offer_id":51124633076051,"sku":"TEKCEM-TEKCEM-5KG","price":320.77,"currency_code":"GBP","in_stock":true},{"title":"Half Pallet (40 x 5kg)","offer_id":53447350354259,"sku":"TEKCEM-TEKCEM-5KG-HP","price":12317.64,"currency_code":"GBP","in_stock":true},{"title":"Full Pallet (80 x 5kg)","offer_id":53447350387027,"sku":"TEKCEM-TEKCEM-5KG-FP","price":22582.34,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/6720\/9043\/files\/mIPbaoK4FZuP9OUPsprbiA0_1_gps_generated.jpg?v=1792771037"},{"product_id":"tekcem-mvs-moisture-vapour-suppressant-5kg","title":"Tekcem MVS - Moisture Vapour Suppressant, 5kg","description":"\u003cp\u003eTekcem MVS is a two-coat moisture vapour suppressant designed for treating concrete subfloors with residual construction moisture up to 95% RH prior to the application of floor finishes. This 5kg liquid formulation penetrates and seals the pores within concrete, effectively blocking moisture transmission and protecting floor coverings from damage.\u003c\/p\u003e\n\u003ch3\u003eKey Benefits\u003c\/h3\u003e\n\u003cdiv class=\"sw-benefits-grid\"\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eTwo-coat application — 0.15kg\/m² per coat\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003ePenetrates and seals concrete pores to block moisture vapour\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eProtects floor coverings from moisture-related damage\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eFast drying — enables quick project continuation\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eSuitable for use under adhesives, levelling compounds, and floor finishes\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eCompatible with concrete and sand\/cement screeds\u003c\/span\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch3\u003eApplication\u003c\/h3\u003e\n\u003cp\u003eEnsure the concrete substrate is clean, dry, and free from contaminants. Apply Tekcem MVS evenly using a roller or brush in two coats of 0.15kg\/m² each. Allow to dry fully before applying levelling compounds or adhesives — drying time varies with temperature and humidity. Do not apply below 10°C air temperature (5°C substrate) or in conditions where condensation may form.\u003c\/p\u003e\n\u003ch3\u003eCoverage\u003c\/h3\u003e\n\u003cp\u003eApproximately 0.15kg\/m² per coat depending on substrate porosity. The 5kg unit covers approximately 16.7m² in a two coat application.\u003c\/p\u003e","brand":"TEKCEM","offers":[{"title":"Single Bag (5kg)","offer_id":51124637172051,"sku":"TEKCEM-TEKCEM-5KG","price":72.38,"currency_code":"GBP","in_stock":true},{"title":"Half Pallet (40 x 5kg)","offer_id":53447350485331,"sku":"TEKCEM-TEKCEM-5KG-HP","price":2779.55,"currency_code":"GBP","in_stock":true},{"title":"Full Pallet (80 x 5kg)","offer_id":53447350518099,"sku":"TEKCEM-TEKCEM-5KG-FP","price":5095.84,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/6720\/9043\/files\/e4LbatufI9iI9OUPlfG90QU_1_gps_generated.jpg?v=1792770747"},{"product_id":"1200g-dpm-4m-x-25m-roll","title":"Black Polythene DPM 1200 Gauge (300mu), 4m x 25m Roll","description":"\u003cp\u003eDamp Proof Membrane (DPM) in construction is a crucial preventive measure to protect buildings from moisture ingress. DPM is an essential barrier system designed to resist moisture from the ground, maintaining the integrity of floor slabs and ensuring the longevity of the structure.\u003c\/p\u003e\n\u003ch3\u003eKey Benefits\u003c\/h3\u003e\n\u003cdiv class=\"sw-benefits-grid\"\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eWith options ranging from sheet-based to liquid-applied membranes, DPM can be adapted to various construction needs, ensuring a watertight seal.\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eIncorporating DPM is a demonstration of foresight in building design, aligning with best practices for moisture control.\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eIts integration is straightforward and is a standard step in the construction process, contributing to a building's resilience and occupant well-being.\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eSelecting a quality DPM is a foundational aspect of sustainable construction, safeguarding the asset against dampness and the elements.\u003c\/span\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"TEKCEM","offers":[{"title":"Black 1200 gauge (300mu)","offer_id":51124647002451,"sku":"SCREEDWORKS-1200G-STD","price":55.24,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/6720\/9043\/files\/mD3basbnF8eQpMYP8N3AgA8_1_gps_generated.jpg?v=1792753109"},{"product_id":"ardex-wpm-200-solvent-free-epoxide-liquid-waterproof-membrane","title":"Ardex WPM 200 Solvent-Free Liquid Waterproof Membrane","description":"\u003cp\u003eARDEX WPM 200 is a solvent-free, low-viscosity, two-component epoxy liquid waterproof membrane that provides a water and water vapour barrier to concrete, screeded, rendered and masonry surfaces and steel. Suitable for BS 8102 Type A waterproofing, it is ideal for plant rooms, under raised access floors, ground floor slabs, swimming pool surrounds and shower areas.\u003c\/p\u003e\n\u003ch3\u003eKey Benefits\u003c\/h3\u003e\n\u003cdiv class=\"sw-benefits-grid\"\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eSolvent-free, two-component epoxy membrane\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eWater and water vapour barrier — accommodates up to 98% RH\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eSuitable for BS 8102 Type A waterproof barriers\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eBrush, roller or notched trowel application\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eSand-blind the second coat as a key for tiling or rendering\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eChemically resistant to oil, grease, salts and dilute acids\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eFor vertical and horizontal surfaces, including steel\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eCompatible with ARDEX tile adhesive range\u003c\/span\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch3\u003eApplication\u003c\/h3\u003e\n\u003cp\u003eMix the whole of Component B into Component A for at least 3 minutes using a slow-speed drill and paddle. Apply two coats of not less than 200 microns each by brush, short\/medium pile roller or notched trowel, the second at right angles to the first after 8 to 24 hours. For tiling, blind the second coat with ARDEX Fine Aggregate or 600 micron dry silica sand while tacky. Movement joints must not be bridged. Not for use over underfloor heating. Do not use below 5°C.\u003c\/p\u003e\n\u003ch3\u003eCoverage\u003c\/h3\u003e\n\u003cp\u003eApprox. 4m²\/kg (4.8m²\/litre) per coat at 200 microns — a 5 litre unit covers approx. 24m² per coat and a 20 litre unit approx. 96m² per coat. Do not exceed 4m²\/kg.\u003c\/p\u003e","brand":"ARDEX","offers":[{"title":"5ltr \/ Black","offer_id":51129807274323,"sku":"ARDEX-200-STD","price":263.94,"currency_code":"GBP","in_stock":true},{"title":"20ltr \/ Black","offer_id":51129807307091,"sku":"18312","price":801.54,"currency_code":"GBP","in_stock":true},{"title":"5ltr \/ Grey","offer_id":51129807339859,"sku":"18311","price":263.94,"currency_code":"GBP","in_stock":true},{"title":"20ltr \/ Grey","offer_id":51129807372627,"sku":"18310","price":801.54,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/6720\/9043\/files\/Gk_baofsDMeQpMYP8N3AgA8_0_gps_generated.jpg?v=1792757597"},{"product_id":"4m-x-125m-x-500mu-bba-black-dpm","title":"4m x 12.5m x 500mu BBA Black DPM","description":"\u003cp\u003eThis 500 micron BBA-certified black polyethylene damp-proof membrane (DPM) provides heavy-duty protection against rising damp in ground-floor constructions. At double the thickness of a standard 250 micron DPM, it offers superior puncture resistance on rough sub-bases and hardcore. Compliant with BS 8102 and BBA approved. Supplied in a 4 m × 12.5 m roll (50 m²).\u003c\/p\u003e\n\u003ch3\u003eKey Benefits\u003c\/h3\u003e\n\u003cdiv class=\"sw-benefits-grid\"\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eBBA certified — independently verified performance\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003e500 micron (2000 gauge) — heavy-duty puncture resistance\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eCompliant with BS 8102 for below-ground waterproofing\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eEffective barrier against rising damp and ground moisture\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eIdeal for rough sub-bases where puncture risk is higher\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eSuitable beneath slabs, screeds and insulation\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eUV stabilised black polyethylene\u003c\/span\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch3\u003eApplication\u003c\/h3\u003e\n\u003cp\u003eLay the membrane over the prepared sub-base or blinding layer with a minimum 300 mm overlap at all joints. Seal overlaps with DPM jointing tape. Turn up at perimeters to lap with the wall DPC. Take care to avoid puncturing — protect with a sand blinding layer if laid directly on hardcore. Can also be used as a slip membrane over insulation before screeding with a 150 mm overlap.\u003c\/p\u003e\n\u003ch3\u003eCoverage\u003c\/h3\u003e\n\u003cp\u003eEach roll covers 50 m² (4 m × 12.5 m). Allow approximately 10–15% extra for overlaps and wastage depending on floor plan complexity.\u003c\/p\u003e","brand":"TEKCEM","offers":[{"title":"Default Title","offer_id":51305554608467,"sku":"SCREEDWORKS-12-STD","price":59.76,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/6720\/9043\/files\/TH3barL8O5uP9OUPsprbiA0_0_gps_generated_31a4cba9-9083-4589-8897-245f7d0127fe.jpg?v=1792780313"},{"product_id":"4m-x-25m-x-250mu-bba-black-dpm","title":"4m x 25m x 250mu BBA Black DPM","description":"\u003cp\u003eThis 250 micron BBA-certified black polyethylene damp-proof membrane (DPM) provides reliable protection against rising damp in ground-floor constructions. Compliant with BS 8102 and BBA approved, it is suitable for use beneath concrete slabs, screeds and insulation in both new-build and refurbishment projects. Supplied in a 4 m × 25 m roll (100 m²).\u003c\/p\u003e\n\u003ch3\u003eKey Benefits\u003c\/h3\u003e\n\u003cdiv class=\"sw-benefits-grid\"\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eBBA certified — independently verified performance\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003e250 micron (1000 gauge) — robust and puncture-resistant\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eCompliant with BS 8102 for below-ground waterproofing\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eEffective barrier against rising damp and ground moisture\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eLarge roll size (100 m²) for efficient coverage\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eSuitable beneath slabs, screeds and insulation\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eUV stabilised black polyethylene\u003c\/span\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch3\u003eApplication\u003c\/h3\u003e\n\u003cp\u003eLay the membrane over the prepared sub-base or blinding layer with a minimum 300 mm overlap at all joints. Seal overlaps with DPM jointing tape. Turn up at perimeters to lap with the wall DPC. Take care to avoid puncturing — protect with a sand blinding layer if laid directly on hardcore. Can also be used as a slip membrane over insulation before screeding with a 150 mm overlap.\u003c\/p\u003e\n\u003ch3\u003eCoverage\u003c\/h3\u003e\n\u003cp\u003eEach roll covers 100 m² (4 m × 25 m). Allow approximately 10–15% extra for overlaps and wastage depending on floor plan complexity.\u003c\/p\u003e","brand":"TEKCEM","offers":[{"title":"Default Title","offer_id":51305554805075,"sku":"SCREEDWORKS-25M-STD","price":51.77,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/6720\/9043\/files\/TH3barL8O5uP9OUPsprbiA0_0_gps_generated.jpg?v=1792769421"},{"product_id":"4m-x-25m-x-500g-clear-polythene-vapour-control-layer","title":"4m x 25m x 500g Clear Polythene Vapour Control Layer","description":"\u003cp\u003eThis 500 gauge (125 micron) clear polythene vapour control layer (VCL) is designed to act as a slip membrane and moisture barrier between insulation and screed in floating floor constructions. Its clear finish allows visual inspection of the substrate beneath. Supplied in a 4 m × 25 m roll (100 m²).\u003c\/p\u003e\n\u003ch3\u003eKey Benefits\u003c\/h3\u003e\n\u003cdiv class=\"sw-benefits-grid\"\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003e500 gauge (125 micron) — durable and puncture-resistant\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eClear finish allows visual inspection of the substrate\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eActs as both slip membrane and vapour control layer\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003ePrevents screed moisture migrating into insulation\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eLarge roll size (100 m²) for efficient coverage\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eSuitable for use with liquid and traditional screeds\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eEasy to cut and position on site\u003c\/span\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch3\u003eApplication\u003c\/h3\u003e\n\u003cp\u003eLay the polythene over the insulation with a minimum 150 mm overlap at all joints. Tape overlaps with polythene tape to prevent screed ingress. Turn up at perimeters behind the edge insulation strip. Take care to avoid puncturing during installation. Trim flush with the finished floor level after the screed has cured.\u003c\/p\u003e\n\u003ch3\u003eCoverage\u003c\/h3\u003e\n\u003cp\u003eEach roll covers 100 m² (4 m × 25 m). Allow approximately 10–15% extra for overlaps and wastage depending on room layout.\u003c\/p\u003e","brand":"TEKCEM","offers":[{"title":"Default Title","offer_id":51305555001683,"sku":"SCREEDWORKS-25M-STD","price":57.53,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/6720\/9043\/files\/nXzbaqHhBZGN9OUP8-GDoQs_0_gps_generated.jpg?v=1792769247"},{"product_id":"4m-x-50m-x-500g-black-polythene-vapour-control-layer","title":"4m x 50m x 500g Black Polythene Vapour Control Layer","description":"\u003cp\u003eA 500-gauge (125 µm) black polythene vapour control layer for use as a slip membrane and moisture separator beneath floating screeds and insulation. It prevents moisture migration from the sub-base into the screed while allowing the screed to move independently of the substrate, reducing the risk of cracking.\u003c\/p\u003e\n\u003ch3\u003eKey Benefits\u003c\/h3\u003e\n\u003cdiv class=\"sw-benefits-grid\"\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cspan\u003e500-gauge polythene for reliable moisture separation\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cspan\u003eSlip membrane function — allows screed to move independently\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cspan\u003eLarge 200 m² roll for efficient site coverage\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cspan\u003ePrevents moisture migration from sub-base into screed\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cspan\u003eLightweight and easy to handle and position\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cspan\u003eSuitable beneath floating screeds and insulation boards\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cspan\u003eCost-effective damp separation layer\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cspan\u003eCompatible with all screed types\u003c\/span\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch3\u003eApplication\u003c\/h3\u003e\n\u003cp\u003eLay the polythene sheet across the entire floor area with a minimum 200 mm overlap at all joints. Turn up at walls and columns to at least screed height. No taping of laps is required when used as a slip membrane only. Ensure the surface beneath is clean and free of sharp objects that could puncture the membrane.\u003c\/p\u003e\n\u003ch3\u003eCoverage\u003c\/h3\u003e\n\u003cp\u003eEach roll covers 200 m² (4 m × 50 m). Allow for 200 mm overlaps at all joints when calculating quantities. For typical rooms, allow approximately 5–10% additional material for overlaps and waste.\u003c\/p\u003e","brand":"TEKCEM","offers":[{"title":"Default Title","offer_id":51305555132755,"sku":"SCREEDWORKS-50M-STD","price":69.66,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/6720\/9043\/files\/MXzbaoeHEpuP9OUPsprbiA0_1_gps_generated.jpg?v=1792769140"},{"product_id":"aluminium-foil-tape","title":"Aluminium Foil Tape","description":"\u003cp\u003eAluminium foil tape is a pressure-sensitive adhesive tape with a pure aluminium backing, designed for sealing joints between foil-faced insulation boards in floor, wall and roof constructions. It maintains the vapour barrier continuity across board joints, preventing moisture ingress and ensuring the insulation system performs as designed.\u003c\/p\u003e\n\u003ch3\u003eKey Benefits\u003c\/h3\u003e\n\u003cdiv class=\"sw-benefits-grid\"\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eMaintains vapour barrier continuity at insulation board joints\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eStrong pressure-sensitive adhesive — bonds immediately\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eMoisture and vapour resistant\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eHeat resistant — will not degrade under screed\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eEasy to tear and apply on site\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eCompatible with all major foil-faced insulation brands\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eConforms to irregular surfaces and corners\u003c\/span\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch3\u003eApplication\u003c\/h3\u003e\n\u003cp\u003eEnsure insulation board joints are tight and clean. Peel the backing liner and press the tape firmly over the joint, overlapping each board edge by a minimum of 25 mm on each side. Smooth down with a roller or by hand to ensure full adhesion. Apply at corners, pipe penetrations and any breaks in the foil facing. Store in dry conditions before use.\u003c\/p\u003e\n\u003ch3\u003eCoverage\u003c\/h3\u003e\n\u003cp\u003eLinear coverage depends on roll length and joint layout. Typical rolls are 45 m or 50 m in length. Allow approximately 10% extra for corners and overlaps.\u003c\/p\u003e","brand":"TEKCEM","offers":[{"title":"Default Title","offer_id":51305555329363,"sku":"SCREEDWORKS-ALUMINIUM-STD","price":13.68,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/6720\/9043\/files\/xXvbao3SGtiI9OUPlfG90QU_3_gps_generated.jpg?v=1792769032"},{"product_id":"black-dpm-bba-certified-4m-x-25m-x-300mu","title":"Black DPM BBA Certified 4m x 25m x 300mu","description":"\u003cp\u003eThis 300 micron (1200 gauge) BBA-certified black polyethylene damp-proof membrane provides dependable protection against rising damp in ground-floor constructions. Supplied in a 4 m × 25 m roll (100 m²), it sits between the 250 micron and 500 micron options in our range, offering enhanced puncture resistance over standard-gauge DPM at an economical price.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey benefits\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBBA certified for use in ground-floor constructions\u003c\/li\u003e\n\u003cli\u003e300mu thickness — greater puncture resistance than standard 250mu DPM\u003c\/li\u003e\n\u003cli\u003eSuitable beneath concrete slabs, screeds and insulation\u003c\/li\u003e\n\u003cli\u003e4 m × 25 m roll covers 100 m² (before laps)\u003c\/li\u003e\n\u003cli\u003eFor new-build and refurbishment projects\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"TEKCEM","offers":[{"title":"Default Title","offer_id":51305557852499,"sku":"SCREEDWORKS-25M-STD","price":55.24,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/6720\/9043\/files\/U3bbaqfvA-KO9OUP3_yG4AY_0_gps_generated.jpg?v=1792767637"},{"product_id":"flowcrete-flowprime-141kg","title":"Flowcrete Flowprime 14.1kg","description":"\u003cp\u003eFlowcrete Flowprime is a two-component, low-viscosity epoxy resin primer for cementitious substrates. It penetrates and seals concrete and screeds prior to overcoating with Flowcrete resin toppings such as Flowshield SL, Flowtex and Mondéco, ensuring a strong, reliable bond between substrate and finish. Supplied as a 14.1 kg kit with pre-measured resin and hardener.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey benefits\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eLow viscosity penetrates and seals cementitious substrates\u003c\/li\u003e\n\u003cli\u003eProvides a strong bond for Flowcrete epoxy and decorative resin finishes\u003c\/li\u003e\n\u003cli\u003eTwo pre-measured components mixed by weight for consistent results\u003c\/li\u003e\n\u003cli\u003e14.1 kg kit\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"FLOWCRETE","offers":[{"title":"Single Bag (14.1kg)","offer_id":51305558016339,"sku":"FLOWCRETE-14-14.1KG","price":288.24,"currency_code":"GBP","in_stock":true},{"title":"Half Pallet (30 x 14.1kg)","offer_id":53447351894355,"sku":"FLOWCRETE-14-14.1KG-HP","price":8338.3,"currency_code":"GBP","in_stock":true},{"title":"Full Pallet (60 x 14.1kg)","offer_id":53447351927123,"sku":"FLOWCRETE-14-14.1KG-FP","price":16676.6,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/6720\/9043\/files\/InXbavLoBtaMpMYP26Os-QM_1_gps_generated.jpg?v=1792767336"},{"product_id":"flowcrete-hydraseal-12kg-yellow","title":"Flowcrete Hydraseal 12kg Yellow","description":"\u003cp\u003eFlowcrete Hydraseal is a solvent-free, water-free epoxy resin liquid-applied surface damp proof membrane. Applied to concrete and cementitious substrates, it withstands moisture vapour from the substrate, allowing floor build-ups and resin finishes to proceed without waiting for the slab to dry naturally. This listing is for the 12 kg kit in yellow (also available in red), the contrasting colour making coverage easy to verify on site.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey benefits\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSuppresses residual construction moisture in concrete subfloors\u003c\/li\u003e\n\u003cli\u003eSolvent-free and water-free epoxy formulation\u003c\/li\u003e\n\u003cli\u003eColoured finish (yellow) gives clear visual confirmation of coverage\u003c\/li\u003e\n\u003cli\u003eIdeal beneath Flowcrete resin systems and levelling compounds\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"FLOWCRETE","offers":[{"title":"Single Bag (12kg)","offer_id":51305558409555,"sku":"FLOWCRETE-FLOWCRETE-12KG","price":236.66,"currency_code":"GBP","in_stock":true},{"title":"Half Pallet (30 x 12kg)","offer_id":53447352025427,"sku":"FLOWCRETE-FLOWCRETE-12KG-HP","price":6846.28,"currency_code":"GBP","in_stock":true},{"title":"Full Pallet (60 x 12kg)","offer_id":53447352058195,"sku":"FLOWCRETE-FLOWCRETE-12KG-FP","price":13692.56,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/6720\/9043\/files\/k3TbaqGQJJuP9OUPsprbiA0_0_gps_generated.jpg?v=1792767195"},{"product_id":"flowcrete-isocrete-m-bond-12kg-black","title":"Flowcrete Isocrete M-Bond Extra 12kg Black","description":"\u003cp\u003eFlowcrete Isocrete M-Bond Extra (black) is a 2-pack, solvent-free epoxy applied as the second coat over Isocrete M-Bond (red) to give a damp-proof membrane and bonding agent in one system. It is used for bonding and damp-proofing cementitious and polymer-modified cementitious screeds to concrete – particularly Isocrete K-Screed, Isocrete Fast-K Screed, Isocrete Screedfast and Isocrete Isogran.\u003c\/p\u003e\n\u003ch3\u003eKey Benefits\u003c\/h3\u003e\n\u003cdiv class=\"sw-benefits-grid\"\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003e2-pack solvent-free epoxy – mixed 3:1 Base A to Hardener B by weight\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eSecond coat over M-Bond to give a damp-proof membrane and bonder in one system\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eBlack colour – easy to tell apart from the red M-Bond first coat\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eSecond coat at approx. 0.4 kg\/m²\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eFor bonding K-Screed, Fast-K Screed, Screedfast and Isogran to concrete\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eSolvent and nonylphenol free – practically odourless\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003ePot life approx. 60 minutes at 20°C\u003c\/span\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch3\u003eApplication\u003c\/h3\u003e\n\u003cp\u003eThe substrate must be surface dry with no ground water pressure. Apply a first coat of Isocrete M-Bond (red) at approx. 0.5 kg\/m². Overcoat with M-Bond Extra after 6 hours at 20°C (12 hours at 10°C) and within 24 hours – after 24 hours, wire-brush the M-Bond to dull the glossy surface first. Mix by adding all of Hardener B to Base A (3:1 by weight, 2:1 by volume) with a slow-speed drill and helical spinner, without entraining air, and use within 60 minutes at 20°C. Apply at 10–25°C (no less than 5°C), at least 3°C above dew point. Lay the screed while the coating is still fluid or tacky – a fully cured, tack-free surface will act as a de-bond layer.\u003c\/p\u003e\n\u003ch3\u003eCoverage\u003c\/h3\u003e\n\u003cp\u003eApproximately 0.4 kg\/m² for the M-Bond Extra coat, over an M-Bond first coat at approx. 0.5 kg\/m². 12 kg of M-Bond Extra covers approx. 30 m².\u003c\/p\u003e","brand":"FLOWCRETE","offers":[{"title":"Single Bag (12kg)","offer_id":51305558540627,"sku":"FLOWCRETE-FLOWCRETE-12KG","price":181.47,"currency_code":"GBP","in_stock":true},{"title":"Half Pallet (30 x 12kg)","offer_id":53447352287571,"sku":"FLOWCRETE-FLOWCRETE-12KG-HP","price":5249.77,"currency_code":"GBP","in_stock":true},{"title":"Full Pallet (60 x 12kg)","offer_id":53447352353107,"sku":"FLOWCRETE-FLOWCRETE-12KG-FP","price":10499.54,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/6720\/9043\/files\/3PbarW_JKyWyrMPzJa9kAY_3_gps_generated.jpg?v=1792767051"},{"product_id":"flowcrete-isocrete-m-bond-6kg-red","title":"Flowcrete Isocrete M-Bond 6kg Red","description":"\u003cp\u003eFlowcrete Isocrete M-Bond (red) is a 2-pack, solvent-free epoxy bonding agent for bonding concrete, cementitious screeds and polymer-modified cementitious screeds to concrete – particularly Isocrete K-Screed, Isocrete Fast-K Screed, Isocrete Screedfast and Isocrete Isogran. It is applied as a single coat, and is also used as the first coat of the two-coat M-Bond Extra damp-proofing system.\u003c\/p\u003e\n\u003ch3\u003eKey Benefits\u003c\/h3\u003e\n\u003cdiv class=\"sw-benefits-grid\"\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003e2-pack epoxy bonding agent – 4.5 kg Base A + 1.5 kg Hardener B\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eFor bonding K-Screed, Fast-K Screed, Screedfast and Isogran to concrete\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eRed colour – easy to check coverage\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eSingle coat at approx. 0.5 kg\/m²\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eFirst coat of the M-Bond Extra bonder and DPM system\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eSolvent and nonylphenol free – practically odourless\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003ePot life approx. 60 minutes at 20°C\u003c\/span\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch3\u003eApplication\u003c\/h3\u003e\n\u003cp\u003eThe substrate must be surface dry, with no ground water pressure in the concrete. Add all of Hardener B to Base A (3:1 by weight, 2:1 by volume) and mix with a slow-speed drill and helical spinner, taking care not to entrain air. Use within 60 minutes at 20°C. Apply at material and substrate temperatures of 10–25°C (no less than 5°C), at least 3°C above dew point, and keep above 5°C for 24 hours after application. Lay the screed while the M-Bond is still fluid or tacky – do not lay onto a fully cured (tack-free) surface, as it will act as a de-bond layer. Tack free after approx. 6 hours at 20°C.\u003c\/p\u003e\n\u003ch3\u003eCoverage\u003c\/h3\u003e\n\u003cp\u003eApproximately 0.5 kg\/m² per coat. One 6 kg unit covers approx. 12 m².\u003c\/p\u003e","brand":"FLOWCRETE","offers":[{"title":"Single Bag (6kg)","offer_id":51305558737235,"sku":"FLOWCRETE-FLOWCRETE-6KG","price":97.47,"currency_code":"GBP","in_stock":true},{"title":"Half Pallet (40 x 6kg)","offer_id":53447352385875,"sku":"FLOWCRETE-FLOWCRETE-6KG-HP","price":3759.7,"currency_code":"GBP","in_stock":true},{"title":"Full Pallet (80 x 6kg)","offer_id":53447352418643,"sku":"FLOWCRETE-FLOWCRETE-6KG-FP","price":7519.39,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/6720\/9043\/files\/NHPbauP3I8OA9OUPicj86Ak_1_gps_generated.jpg?v=1792766840"},{"product_id":"rhinoplast-tophats-flexible-inc-jubilee-clip","title":"Rhinoplast Tophats Flexible inc Jubilee Clip","description":"\u003cp\u003eRhinoplast Tophats Flexible inc Jubilee Clip\nPrincipal Top Hats are used around service pipe penetrations to provide an effective gas tight seal. The base of the pre-formed unit should be sealed using Rhinoplast LT Jointstrip and overtaped at the edges with Girth Tape.\u003c\/p\u003e\n\u003ch3\u003eKey Benefits\u003c\/h3\u003e\n\u003cdiv class=\"sw-benefits-grid\"\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eA stainless steel Jubilee clip is available for the collar.\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eAirtight seals should be formed around all service entry points.\u003c\/span\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"RHINOPLAST","offers":[{"title":"Default Title","offer_id":51305570402643,"sku":"RHINOPLAST-RHINOPLAST-STD","price":20.09,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/6720\/9043\/files\/2GbbapTsNZuP9OUPsprbiA0_2_gps_generated.jpg?v=1792763695"},{"product_id":"rhinoplast-tophats-rigid-inc-jubilee-clip","title":"Rhinoplast Tophats Rigid inc Jubilee Clip","description":"\u003cp\u003eRhinoplast Tophats Rigid inc Jubilee Clip\nPrincipal Top Hats are used around service pipe penetrations to provide an effective gas tight seal. The base of the pre-formed unit should be sealed using Rhinoplast LT Jointstrip and overtaped at the edges with Girth Tape.\u003c\/p\u003e\n\u003ch3\u003eKey Benefits\u003c\/h3\u003e\n\u003cdiv class=\"sw-benefits-grid\"\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eA stainless steel Jubilee clip is available for the collar.\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eAirtight seals should be formed around all service entry points.\u003c\/span\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"RHINOPLAST","offers":[{"title":"Default Title","offer_id":51305570599251,"sku":"RHINOPLAST-RHINOPLAST-STD","price":22.68,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/6720\/9043\/files\/Umbbat3MC6DdsNYPvoPVkAU_1_gps_generated.jpg?v=1792763553"}],"url":"https:\/\/shop.screedworks.co.uk\/collections\/waterproofing-moisture-control.oembed?page=3","provider":"Screed Works Shop","version":"1.0","type":"link"}