{"product_id":"weberfloor-industrial-base-4600-25kg","title":"Weberfloor Industrial Base 4600, 25kg","description":"\u003cp\u003eweberfloor industrial base 4600 is a rapid setting, self-smoothing base screed for industrial areas. It levels highly irregular concrete floors from 5mm to 30mm and makes them ready for a Weber industrial top screed, weberfloor industry pro top 4610 or weberfloor industry rapid 4655, much earlier than a traditional sand and cement or concrete screed. It is ideal for renovating existing floors with large irregularities.\u003c\/p\u003e\n\u003ch3\u003eKey benefits\u003c\/h3\u003e\n\u003cdiv class=\"sw-benefits-grid\"\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003e5mm to 30mm, fully bonded to concrete\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eWalk on after 2 to 3 hours at 20°C\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eReady for the top screed after a minimum of 36 hours\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eCompressive strength C30, flexural strength F6, shrinkage below 0.05% at 28 days\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eLevels highly irregular substrates\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sw-benefit\"\u003e\n\u003cdiv class=\"sw-check\"\u003e​\u003c\/div\u003e\n\u003cspan\u003eCan be ground after 2 days if needed\u003c\/span\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch3\u003eWhat you need for the job\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePrimer: weberfloor 4720 epoxy primer, Weber's choice for industrial construction and also suited to moisture-sensitive surfaces, or weberfloor 4716 primer\u003c\/li\u003e\n\u003cli\u003eTop screed: weberfloor industry pro top 4610 or weberfloor industry rapid 4655\u003c\/li\u003e\n\u003cli\u003e10 x 100mm edge foam, and weberfloor 4965 barrier foam for bays and stop ends\u003c\/li\u003e\n\u003cli\u003eHollows over 30mm in small areas: two layers of 4600, the first hardened and primed before the second (12 hours between layers). For larger areas Weber recommends weberfloor 4360.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eMixing\u003c\/h3\u003e\n\u003cp\u003e4.5 litres of water per 25kg bag (18%). Pot life 20 minutes at 20°C. Do not add more water: it lowers strength, increases shrinkage and makes the mix separate.\u003c\/p\u003e\n\u003ch3\u003eCoverage\u003c\/h3\u003e\n\u003cp\u003eApprox. 1.85kg per m² per mm. One 25kg bag covers about 2.7m² at 5mm or 1.35m² at 10mm (calculated from the Weber figure).\u003c\/p\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eA base screed only: it is not a wearing screed and must be covered with weberfloor industry pro top 4610 or industry rapid 4655. Never paint it or leave it bare.\u003c\/li\u003e\n\u003cli\u003eFor use inside buildings.\u003c\/li\u003e\n\u003cli\u003eThe concrete needs a surface strength above 1.5 N\/mm² and relative humidity below 95%.\u003c\/li\u003e\n\u003cli\u003eKeep the substrate and the air between 10°C and 25°C while laying and for at least a week after, with no draughts for 3 days.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eData sheet and technical help\u003c\/h3\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.uk.weber\/files\/gb\/2024-03\/weberfloor%20industrial%20base%204600%203-24.pdf\" target=\"_blank\" rel=\"noopener\"\u003eweberfloor industrial base 4600 technical data sheet (March 2024)\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eFor technical questions, contact Weber technical on \u003ca href=\"tel:+441525718877\"\u003e+44 (0)1525 718877\u003c\/a\u003e or \u003ca href=\"mailto:technical@netweber.co.uk\"\u003etechnical@netweber.co.uk\u003c\/a\u003e.\u003c\/p\u003e","brand":"WEBER","offers":[{"title":"Single Bag (25kg)","offer_id":55827987104083,"sku":"WEBER-4600-25KG","price":24.21,"currency_code":"GBP","in_stock":true},{"title":"Half Pallet (20 x 25kg)","offer_id":55827987136851,"sku":"WEBER-4600-25KG-HP","price":484.2,"currency_code":"GBP","in_stock":true},{"title":"Full Pallet (40 x 25kg)","offer_id":55827987169619,"sku":"WEBER-4600-25KG-FP","price":968.4,"currency_code":"GBP","in_stock":true}],"url":"https:\/\/shop.screedworks.co.uk\/products\/weberfloor-industrial-base-4600-25kg","provider":"Screed Works Shop","version":"1.0","type":"link"}