Ardex WPM 200 Solvent-Free Liquid Waterproof Membrane
- Moisture Protection
- Construction Grade
Typical lead time 2-3 working days. Next-day delivery on request: call before 11am (not guaranteed).
Product Description
ARDEX WPM 200 is a solvent-free, low-viscosity, two-component epoxy liquid waterproof membrane that provides a water and water vapour barrier to concrete, screeded, rendered and masonry surfaces and steel. Suitable for BS 8102 Type A waterproofing, it is ideal for plant rooms, under raised access floors, ground floor slabs, swimming pool surrounds and shower areas.
Key Benefits
Application
Mix the whole of Component B into Component A for at least 3 minutes using a slow-speed drill and paddle. Apply two coats of not less than 200 microns each by brush, short/medium pile roller or notched trowel, the second at right angles to the first after 8 to 24 hours. For tiling, blind the second coat with ARDEX Fine Aggregate or 600 micron dry silica sand while tacky. Movement joints must not be bridged. Not for use over underfloor heating. Do not use below 5°C.
Coverage
Approx. 4m²/kg (4.8m²/litre) per coat at 200 microns, a 5 litre unit covers approx. 24m² per coat and a 20 litre unit approx. 96m² per coat. Do not exceed 4m²/kg.
Additional information
-
Supporting A Band of Brothers UK
We are proud to support A Band of Brothers UK, a charity helping young men break cycles of violence and crime through mentoring, through our easyfundraising partnership.
-
Restore & Protect
Our contracting clients can round up their final invoice to the nearest £5, £10 or £20. We match the amount pledged and donate the total to Tree Sisters.
-
Supporting Kiva
We are proud to support Kiva, the non-profit that crowdfunds 0% interest microloans for entrepreneurs worldwide.
