Kerakoll Proflow Finish is a high-performance fibre reinforced single component smoothing compound with rapid setting and prolonged working time. Its advanced formulation allows for complete control under the trowel whilst maintaining high flow properties, exceptional repair properties, extended working and wet edge time, and delivers a flawless surface finish upon drying.

Key Features

• Next generation moisture tolerant formulation
• Multi-purpose — suitable for all substrate types and floor coverings
• Flawless surface finish
• Thicknesses from 3 to 60mm
• Moisture tolerant — can be used below DPM
• Free flowing formulation with prolonged wet edge and working time
• Formulated with high-performance raw materials with low environmental impact
• Suitable for installing any type of resilient floor covering
• Apply by hand trowel, cam rake, pin level or mechanical pump

Green Building Rating 4

Regional Mineral ≥ 60% | CO₂ Emission ≤ 250 g/kg | VOC Low Emission | Recyclable

Areas of Application

Self-smoothing adjustment of irregular and uneven substrates. Suitable for cement-based screeds, calcium sulphate-based screeds, concrete, existing tiled floors, flooring grade plywood, asphalt/bitumen, and epoxy DPM. Internal floors in domestic, commercial and industrial applications.

Covering Materials

LVT and design flooring, vinyl, sheet vinyl and safety flooring, hardwood floors, textiles, rubber, PVC, linoleum, carpet, and raised floors.

Preparation

Pour 4.5–5.2 litres of clean water into a clean container, then pour in a bag of Proflow Finish while shaking. Mix with a mechanical mixer until smooth, lump-free and self-smoothing. Let rest for approx. 2 minutes, then mix again briefly.

Certificates

CE marked | EN 13813 | CT C25-F6