Kerakoll Proflow Rapid is an ultra-rapid setting double component smoothing compound for fast track substrate preparation before laying resilient flooring. Ideal for installations where rooms or access need to be put back into service in a short time frame. With a walk-on time of just 30 minutes and an installation time of just 60 minutes, Proflow Rapid is a true ultra-rapid setting smoothing compound with free flowing properties, moisture tolerant capabilities, and a flawless surface finish.

Key Features

• Next generation moisture tolerant formulation
• Flawless surface finish
• Ultra-rapid setting — foot traffic after just 30 minutes
• Install resilient floor coverings after just 60 minutes
• Moisture tolerant — can be used below DPM
• Formulated with high-performance raw materials with low environmental impact
• Suitable for installing any type of resilient floor covering
• Apply by hand trowel, cam rake or pin level

Green Building Rating 4

Regional Mineral ≥ 60% | CO₂ Emission ≤ 250 g/kg | VOC Low Emission | Recyclable

Areas of Application

Self-smoothing adjustment of irregular and uneven substrates with ultra-rapid setting and drying. Thicknesses from 3 to 12mm. Suitable for cement-based screeds, calcium sulphate-based screeds, concrete, existing tiled floors, flooring grade plywood, asphalt/bitumen, and epoxy DPM. Internal floors in domestic, commercial and industrial applications.

Covering Materials

LVT and design flooring, vinyl, sheet vinyl and safety flooring, mosaic tiles, hardwood floors, textiles, rubber, PVC, linoleum, carpet, and raised floors.

Preparation

Pour the pre-measured 4.5L bottle of Proflow Rapid liquid into a clean container, then pour in a bag of Proflow Rapid while shaking. Mix with a mechanical mixer until smooth, lump-free and self-smoothing. Let rest for approx. 2 minutes, then mix again briefly.

Certificates

CE marked | EN 13813 | CT C20-F7