Kerakoll Proflow Smooth is a high-performance double component smoothing compound. Free flowing and rapid setting with prolonged working time. Its advanced formulation allows for effortless application whilst maintaining control under the trowel, with high flow properties, exceptional repair properties, extended working and wet edge times, and a surface finish ideal for direct bonding of LVT and other resilient flooring.

Key Features

• Next generation moisture tolerant formulation
• Flawless surface finish
• Free flowing formulation makes application effortless
• Moisture tolerant — can be used below DPM
• Prolonged wet edge and working time combined with rapid install time
• Formulated with high-performance raw materials with low environmental impact
• Suitable for installing any type of resilient floor covering
• Apply by hand trowel, cam rake or pin level

Green Building Rating 3

Regional Mineral ≥ 60% | CO₂ Emission ≤ 250 g/kg | Recyclable

Areas of Application

Self-smoothing adjustment of irregular and uneven substrates, with rapid setting and drying. Thicknesses from 3 to 12mm. Suitable for cement-based screeds, calcium sulphate-based screeds, concrete, ceramic floors, flooring grade plywood, asphalt/bitumen, and epoxy DPM. Internal floors in domestic, commercial and industrial applications.

Covering Materials

LVT and design flooring, vinyl, sheet vinyl and safety flooring, mosaic tiles, hardwood floors, textiles, rubber, PVC, linoleum, carpet, and raised floors.

Preparation

Pour the pre-measured 5L bottle of Proflow Smooth liquid into a clean container, then pour in a bag of Proflow Smooth while shaking. Mix with a mechanical mixer until smooth, lump-free and self-smoothing. Let rest for approx. 2 minutes, then mix again briefly.

Certificates

CE marked | EN 13813 | CT C16-F6